Home | Products | Acoustic cameras | Portable ultrasonic camera
Portable ultrasonic camera
The portable version allows you to monitor the condition of the object during periodic inspections.
Included in ИАС 
The acoustic camera is used to monitor equipment in the power industry, to detect leaks of various gases in the oil and gas industry, and for non-contact diagnostics of devices such as:
- Oil-filled voltage transformers and circuit breakers
- High voltage bushings
- Wires, buses and equipment contact connections
- Power transformers of distribution networks
- Gas pipeline valves and seals
- Pipeline valve seals
- Pipe flange connections
- Drain pipes
- Shut-off valves
- Purge line
| Specifications | Value |
|---|---|
| Number of recording channels | 112 digital MEMS microphones |
| Signal resolution in each channel | 16 Bit |
| Operating frequency range | from 7000 to 48000 Hz |
| Signal sampling rate in each channel | 96000 Hz |
| Integral level of acoustic signals | from 29 dB to 116 dB |
| IP rating | IP42 |
| Acoustic coverage angle | 70°, 4x zoom |
| Operating temperature range | from-20 °С to +50 °С |
| Camera resolution | 1920×1080 (Full HD) |
| Operating mode | Detection of defects during scheduled walk-throughs of a group of equipment |
| Applications | -Monitoring the condition of electrical substation, power transformers, distribution devices, couplings on power cables - Checking the tightness of gas and steam pipelines (fistulas, defects in flange and fitting connections, defects in welds, corrosion damage to pipelines) - Checking the tightness of fuel lines (fistulas, fuel leaks) - Checking the tightness of freon pipes and pneumatic pipes (defects in flange and fitting connections, defects in soldering and crimping) |
| Computing module | Embedded compute module with pre-installed Aura SVS software |
Connect with us
Connect with us